Toyota Land Cruiser 200 2010 Owner's Manual page 403

■
Programming an entry gate (for U.S.A. owners)/Programming
all devices in the Canadian market
STEP 1
Place your transmitter 1 to 3 in. (25 to 75 mm) away from the
surface of the HomeLink
Keep the HomeLink
STEP 2
Press and hold the selected HomeLink
STEP 3
Repeatedly press and release (cycle) the device's remote
control button for two seconds each until step 4 is completed.
STEP 4
When the indicator light on the HomeLink
ceiver starts to flash rapidly, release the buttons.
STEP 5
Test the operation of the HomeLink
programmed button. Check to see if the gate/device operates
correctly.
STEP 6
Repeat the steps above to program another device for each of
the remaining HomeLink
■
Programming other devices
To program other devices such as home security systems, home
door locks or lighting, contact your authorized Toyota dealer for
assistance.
■
Reprogramming a button
The individual HomeLink
reprogrammed. To reprogram a button, follow the "Reprogramming
a HomeLink
L/C200_U (OM60G31U)

.

indicator light in view while programming.

buttons.

buttons cannot be erased but can be

button" instructions.
3-7. Other interior features

button.

compatible trans-

by pressing the newly
3
403