Toyota Land Cruiser 200 2010 Owner's Manual page 155

■
Changing "ENGINE START STOP" switch mode
Modes can be changed by pressing the "ENGINE START
STOP" switch with the brake pedal released. (The mode
changes each time the switch is pressed.)
*: If the shift lever is in a position other than "P" when turning off the
engine, the "ENGINE START STOP" switch will be turned to
ACCESSORY mode, not to OFF.
L/C200_U (OM60G31U)
2-1. Driving procedures
*
OFF
Emergency flashers can be
used.
ACCESSORY mode
Some electrical components
such as the audio system can
be used.
The "ENGINE START STOP"
switch indicator turns amber.
IGNITION ON mode
All electrical components can
be used.
The "ENGINE START STOP"
switch indicator turns amber.
2
155