Toyota Land Cruiser 200 2010 Owner's Manual page 438

4-3. Do-it-yourself maintenance
Brake fluid
■
Checking fluid level
Make sure to check the fluid type and prepare the necessary items.
■
Adding fluid
Fluid type
Items
■
Refilling brake fluid
STEP 1
Turn the "ENGINE START STOP" switch OFF.
STEP 2
Depress the brake pedal more than 40 times.
STEP 3
Remove the reservoir cap by hand. Add brake fluid up to the
"MAX" line.
If you do not follow the procedure above, the reservoir may over-
flow.
438
L/C200_U (OM60G31U)
The brake fluid level should be
between the "MAX" and "MIN"
lines on the tank.
1
2
ITY43C069
FMVSS No.116 DOT 3 or SAE J1703 brake fluid
Clean funnel
MAX
MIN