3-7. Other interior features
■
Programming HomeLink
STEP
1
STEP
2
400
L/C200_U (OM60G31U)
Point the remote control trans-
mitter for the device 1 to 3 in. (25
to 75 mm) from the HomeLink
buttons.
Keep the HomeLink
light in view while programming.
Press and hold one of the
HomeLink
transmitter button. When the
HomeLink
changes from a slow to a rapid
flash, you can release both but-
tons.
If the HomeLink
comes on but does not flash,
flashes rapidly for 2 seconds and
remains lit, the HomeLink
is already programmed. Use the
other
buttons
"Reprogramming a HomeLink
button" instructions. (P. 404)
indicator
buttons and the
indicator
light
indicator light
button
or
follow
the