Troubleshooting; Maintenance - GBC F-60H Operation & Maintenance Manual

Safety

1.7 Troubleshooting

The following symbols are positioned at various
points in Section 7 Troubleshooting.
Do not wear ties, loose fitting clothing or
dangling jewelry while operating or
servicing the laminator. These items can get
caught in the nip and choke you or you can
be crushed or burned.
INFORMATION
For optimal temperature settings of
various laminates, contact your
supplier or sales representative.
Page 1 - 10
WARNING
F 60 H Operation and Maintenance Manual

1.8 Maintenance

The following symbols are positioned at various
points in Section 8 Maintenance.
Do not wear ties, loose fit clothing or
dangling jewelry while operating or
servicing the laminator. These items can get
caught in the nip and choke you or you can
be crushed or burned.
INFORMATION
Improper maintenance, can
result in poor output quality.
Remove power from the laminator before
servicing. You can be severely shocked,
electrocuted or cause a fire.
IN F O R M A T IO N
B elow is a recom m end ed m ain ten an ce
sch ed ule. B efore perform in g any of th e step s
listed , read th rou gh th e p rocedu res first.
Please follow the in structions pertaining to
the step you are perform ing.
© April 2001 General Binding Corporation
WARNING
ELECTRICAL
S H O C K