GBC F-60H Operation & Maintenance Manual page 18

Safety
IN F O R M A T IO N
A b ou t recyclin g: T he crate com p on en ts can
b e reu sed for shipp ing th e lam in ator again
or can b e d isassem b led and th e w ood and
screw s recycled. T h e shrink w rap is n ot
recyclab le, so it m u st b e discarded.
D o not m ove the leveling nut w hen securin g
the inside nut to th e cabinet.
IN F O R M AT IO N
Y ou w ill need the control side cabinet cover
off to connect the electrical pow er.
Only a qualified electrician should connect
power to the laminator. You can be severely
shocked, electrocuted or cause a fire if
power is improperly applied.
Page 1 - 6
C A U T IO N
ELECTRICAL
S H O C K
F 60 H Operation and Maintenance Manual
WARNING
Follow the correct wiring diagram when
supplying power to the laminator. If
improperly connected, you can be seriously
injured or cause damage to the laminator.
WARNING
Do not wear ties, loose fit clothing or
dangling jewelry while operating or
servicing the laminator. These items can get
caught in the nip and choke you or you can
be crushed or burned.
WARNING
If a safety feature is not working
properly, contact your local service
representative immediately.
C AU T IO N
D o not use a hard substrate or a substrate
w ith sharp edges. Y ou m ay cause dam age to
the lam inating rollers!
© April 2001 General Binding Corporation