Clean Cabinets And Covers; Clean The Control Panel - GBC F-60H Operation & Maintenance Manual

Maintenance

8.3 Clean cabinets and covers

Remove power from the laminator before
cleaning. You can be severely shocked,
electrocuted or cause a fire.
a) Use a damp cotton terry cloth ( water only ),
clean the exterior of the laminator.
b) If water is not strong enough, you may use a
mild dishwashing detergent with water and a
cotton terry cloth.
Do not use liquid or aerosol cleaners on the
laminator. Do not spill liquid of any kind on
the laminator. You can be severely shocked,
electrocuted or cause a fire. Use only a damp
cloth for cleaning unless other wise
specified.
Page 8 - 4
ELECTRICAL
S H O C K
ELECTRICAL
S H O C K
F 60 H Operation and Maintenance Manual

8.4 Clean the control panel

Remove power from the laminator before
cleaning. You can be severely shocked,
electrocuted or cause a fire.
a) Use only a slightly damp ( water only ) non
abrasive cloth.
b) The same type of cloth used to clean eye
glasses may be used instead.
Do not use liquid or aerosol cleaners on the
laminator. Do not spill liquid of any kind on
the laminator. You can be severely shocked,
electrocuted or cause a fire. Use only a damp
cloth for cleaning unless other wise
specified.
© April 2001 General Binding Corporation
ELECTRICAL
S H O C K
ELECTRICAL
S H O C K