Film Problems - GBC F-60H Operation & Maintenance Manual

F 60 H Operation and Maintenance Manual

7.2 Film problems

The following is a list of common film problems
you may encounter.
For definitions of terminologies, please refer to
7.4 Glossary of terminology.
Pressure sensitive
Problem : Silvering in the laminate
Hints : • Add 100 - 120
temperature
• Increase pressure to laminating rolls
Problem : Tunneling
Hints : • Print should be wound image side out.
• Do not roll tightly
• Do not roll at all.
Problem: Delamination
Hints: • Check operating pressures
• Check operating speed
• Laminate compatibility with ink
• Ink compatibility with paper
© April 2001 General Binding Corporation
o o
F ( 37 - 49 C ) to the
Lo-Melt laminates
Problem: Blistering within the image
Hints: • Increase the speed
• Decrease the operating temperature
• Allow a longer drying time for the image
Problem: Silvering in the laminate
Hints: • Decrease the speed
• Increase the operating temperature
Problem: Delamination
Hints: • Check operating temperatures
• Check operating speed
• Laminate compatibility with ink
• Ink compatibility with paper
Mounting
Problem : Image creases when mounting
Hints : • Press down on leading edge from center
outwards.
• Be sure image is conformed to the roll
• Use a speed you are comfortable with
• Be sure even tension is supplied to the image
Troubleshooting
Page 7 - 3