GBC F-60H Operation & Maintenance Manual page 88

Applications
Materials - PSA Single sided lamination ( craft paper method)
Top material : Roll of pressure sensitive laminate
Bottom material : Roll of craft paper
Other material (s) : Prints
Motor Direction
Motor Speed
3
2
1
Roller Pressure
Notes: Top and bottom material should be of the same width. Do not use excessive brake
tension for this application. Speed should be comfortable for the operator. Pressure will
vary depending on the width and weight of the image and laminate. Heat is optional.
Some heat will assist the flow of adhesive. Refer to helpful hints for pressure sensitive
films.
Page 6 - 26
PROCESS CONTROL CHART
5 6
4 7
8
9
10
RANGE
F 60 H Operation and Maintenance Manual
Heater
Upper Roller Temperature
CAL 3200
RANGE
CAL 3200
© April 2001 General Binding Corporation