Technical Data: Logo! Contact 24/230; A.18 Technical Data: Logo! Contact 24/230 - Siemens LOGO! Manual

A.18

Technical data: LOGO! Contact 24/230

LOGO! Contact 24 and LOGO! Contact 230 are switching modules for direct switching of
ohmic loads up to 20 Amps and motors up to 4 kW (without noise emission, hum-free). Both
modules have a built-in protective circuit for damping surges.
Operating voltage
Switching capacity
Utilization category AC-1: Switching of ohmic loads at 55°C
Operating current at 400 V
Output with three-phase loads at 400 V
Utilization category AC-2, AC-3: Motor with slip ring induction/cage
armature
Operating current at 400 V
Output with three-phase loads at 400 V
Short-circuit protection:
Assignment type 1
Assignment type 2
Connecting leads
Dimensions (WxHxD)
Ambient temperature
Storage temperature
LOGO!
Manual, 10/2017, A5E01248535-AA

A.18 Technical data: LOGO! Contact 24/230

LOGO!
Contact 24
24 V DC
20 A
13 kW
8.4 A
4 kW
25 A
10 A
Fine-wire with wire end ferrules
Solid wire
2 x (0.75 to 2.5) mm2
2 x (1 to 2.5) mm2
1 x 4 mm2
36 x 72 x 55
-25 ... +55 °C
-50 ... +80 °C
Technical data
LOGO!
Contact 230
230 V AC;
50/60 Hz
271