Defining The Type Of Analog Outputs - Siemens LOGO! Manual

Defining a specific analog output value
To output a specific analog value at the two analog outputs:
1. Move the '>' cursor to 'Defined': Press
2. Confirm 'Defined': Press OK
The display shows:
3. Enter a specific output value for each of the two analog outputs.
4. To confirm your entry: Press OK
3.7.12

Defining the type of analog outputs

Analog outputs can be either 0..10V/0..20mA, which is the default, or 4..20mA.
To define the type of analog outputs, follow these steps starting from the programming
menu:
1. Move the ">" cursor to 'Edit..': Press
2. Select 'Edit': Press OK
3. Move the ">" cursor to 'AQ': Press
4. Select 'AQ': Press OK
5. Move the ">" cursor to 'AQ type': Press
6. Select 'AQ type': Press OK
LOGO! shows the following display, for example:
The defined type for each analog channel is shown. To change the type, continue as
follows
7. Move to the AQ
that you want to change. Press
8. Select either default (0..10V/0..20mA)
or 4..20mA. Press
9. Confirm your selection. Press OK
LOGO!
Manual, 10/2017, A5E01248535-AA
or
or
or
or
or
or
Programming LOGO!
3.7 Writing and starting the circuit program
91