Table of Contents
Advertisement
••••• ••••••••••••••••••••••••• •••••••
HINT
• E/F/HS parameters can be changed individually .
• The results of the changed parameter, such as E/F/
HS, are automatically stored, and can also be reflect-
ed in following exposures.
•• • •• •• • •• •• •••••••••••••••••••••••••••••••••••••••••
6 .7 .2
Change of the ROI area
This device will automatically recognize the ROI
and display in the image area . The ROI area can be
changed manually as necessary .
1
Press [ROI Adjustment].
• The viewer screen is displayed .
2
Change the ROI area.
• When an image is pressed in any location, ROI
moves with the pressed part as the center .
6 .7 Functions of the viewer screen
Icon
3
Press [Return] after change.
• Returns to the exposure screen.
IMPORTANT
• •• ••• •• •• •• ••• •• •• •• ••• •• •• •• •• • • • • •
• When the ROI area is changed, the auto gradient pro-
cess is performed again, and the optimized image is
displayed .
•• •• •• •• ••• •• •• •• ••• •• •• •• ••• •• •• •• ••• •• •• •• ••• •• • • • •
177
Functions
Switch between [ON] and
[OFF] of ROI mode.
Press any 2 points to specify
the square with a diagonal line
that connects the 2 points as
the size of the ROI area .
Adjust the width of the ROI
area . The width changes every
time you press these buttons .
Adjust the height of the ROI
area . The height changes every
time you press these buttons .
Switch between the displays
of 2 ROIs when the image pro-
cessing parameter has 2 ROIs .
Resets operations performed
in the tab .
Advertisement
Table of Contents
