Table of Contents
Advertisement
7.5 Manual stitching exposure
2
Press [Stitching] .
• The viewer screen (for stitching combination po-
sition adjustment) is displayed .
3
Select the frame which will adjust the im-
age combination position .
• Focus is applicable to the frame so you will be
able to make adjustments .
IMPORTANT
•••••••••••••••••••••••••••••• •••••••
• Adjust the density of each image in this step .
• If there are three images, adjust the density of the
upper and lower images to that of the center image .
If an image used as the density standard is changed,
adjust the density so that it suits the changed image .
• If there are two images, adjust the density of the upper
image to that of the lower image . If the upper image is
used as the density standard, adjust the density of the
lower image based on the upper image .
• • •• • • •• • •• • • ••••••••••••••••••••••••••••••••••••••••
HINT
• For the frame display format, 1×1, 2×1, and 2×2
display options can be selected .
• A 2×2 frame display can only be selected when
combining 3 images .
•••••••••••••••••••••••••••••••••••••••••••••••••• • ••
4
Adjust the image combination position .
• For details on how to operate the viewer screen
(for stitching combination position adjustment),
refer to "7 .5 .1 Screen structure" .
• Select another frame and adjust the combina-
tion position as needed .
IMPORTANT
• Even if the displayed transmittance of the overlap por-
tion is modified during the adjustment, it will not be
reflected in the output image.
•••••••••••••••••••••••••••••••••••••••••••••••••• • ••
5
Once all combination positions are ad-
justed, press [Apply] .
• The image combination position is confirmed.
248
•••••••••••••••••••••••••••••••••• • ••
•••••••••••••••••••••••••••••••••• • ••
Advertisement
Table of Contents
