Table of Contents
Advertisement
8.2 Dialog boxes/balloons and countermeasures
Displayed message
This cassette has already been started reading .
Unable to delete barcode registration .
This cassette has already been started reading .
Unable to delete jobs registered with manual registration mode .
This cassette is already registered .
Register a different cassette.
This cassette is for contact mammography. Check the Exam.
Tag .
This cassette is for general exposure.
Check the Exam. Tag.
This cassette is for PCM. Check the Exam. Tag.
This character is not allowed
This data is being output .
This data is being processed .
This data is guarded .
This image can't be deleted because it is being output .
Timeout occurred in image reception .
Unable to clear log
Unable to prepare to read CR cassette as CR Mammography
license is not installed, Please register the license .
Unable to receive the image .
Suspend the study, and then re-start this study .
It probably retrieve the image .
Unable to register mammo exam tag. because CR Mammogra-
phy license is not installed . Please install the license .
Update Success .
User: [USERNAME] has already logged in.
Log off this user?
Wireless Access Point channel setting change failed .
Wireless Access Point channel setting successfully changed .
You cannot register more than [MaxSize] images.
Problems/countermeasures
Displayed when trying to delete a cassette barcode that is
already being read .
Displayed when trying to change the order of Exam. Tags that
are already being read .
This is displayed when trying to register a cassette that is al-
ready registered to a barcode .
This is displayed when a bar code for a mammogram cassette
is read in to a registered exposure condition.
Displayed when a barcode of a normal exposure cassette is
read into a registered mammogram exposure condition.
This is displayed when a bar code for a mammogram cassette
is read in to a registered exposure condition.
Displayed when an invalid character is entered .
Do not enter these characters .
Study output in progress . Wait until the processes end .
Study processing in progress . Wait until the processes end .
Displayed when trying to delete a study which is protected .
Displayed when trying to delete a queue while output is in prog-
ress . Delete the queue after stopping output .
Displayed when a timeout occurs while the device is receiving
an image from the DR Detector .
Tap the Exam. Tags (in the yellow frame) to re-acquire the im-
age .
Displayed when deleting the log using the Log management
tool or Reject log tool fails .
Restart this device and try to delete the log again .
Displayed when mammogram exposure conditions are read
with the barcode and the CR Mammography license is not reg-
istered .
Register the CR Mammography license .
Displayed if an image may be recovered when exposure is
interrupted due to an internal error in this device . If the image
is not displayed and the DR Detector does not contain untrans-
ferred images (the same status as that observed when no expo-
sures have been carried out), the image may be recoverable by
suspending the study and displaying the exposure screen from
the list screen again .
This is displayed when registering mammogram exposure
conditions using a DR Detector that has not had the CR Mam-
mography license registered .
Displayed when image transfer is successful .
Press [OK].
Displayed when attempting to log in into another account while
a user is already logged in .
Press [OK] to log in with a different user account.
Displayed when changing the wireless access point channel
settings fails .
Press [Close] to close the screen and then check the AeroDR
Portable RF Unit or AeroDR Portable UF Unit condition .
This is displayed when the channel settings of the wireless ac-
cess point has been changed .
This is displayed when trying to add an Exam. Tag exceeding
the maximum number of Exam. Tags that can be registered.
372
Advertisement
Table of Contents
