Exposure Preparations - Konica Minolta CS-7 Operation Manual

7 .1 .2

Exposure preparations

The exposure using the AeroDR Portable RF Unit is
performed with the following procedure . The following
procedure is for an example in which a wired connec-
tion is in operation between this device and a higher
system .
IMPORTANT ••••• ••••••••••••••••••••••••• •••••••
• When this device is being used in the AeroDR Por-
table RF Unit, charge it when a notification that the
battery level is low is displayed .
•• • •• •• • •• •• •••••••••••••••••••••••••••••••••••••••••
1
Register the DR Detector in this device that is
to be used in AeroDR Portable RF Unit.
• For operation of the DR Detector, refer to
"AeroDR Operation Manual" .
HINT ••••• ••••••••••••••••••••••••• •••••••
• Confirm that the outputs of host, RIS-OUT and printer
are [ON] on the system monitor screen ([System Moni-
tor] tab).
In case of the host
The device switches between [ON] and [OFF] every
time [Output] is pressed.
• When using a RIS-OUT or printer, confirm the output is
set to [ON] using the same procedure.
•• • •• •• • •• •• •••••••••••••••••••••••••••••••••••••••••
7.1 Exposure with AeroDR Portable RF Unit
2
Import the examination information to be
used for the exposure using the portable
X-ray device .
• Confirm that an Ethernet cable is connected to
this device .
• Press [Refresh] on the list screen on this device.
• The latest examination information is imported
from the higher system by pressing the [Refresh]
button .
• ••• •• •• •• ••• •• •• •• •• ••• •• •• •• ••• • • • •
HINT
• To input examination information manually, change the
screen to the patient registration screen .
•• •• •• •• ••• •• •• •• ••• •• •• •• ••• •• •• •• ••• •• •• •• ••• •• • • • •
3
Remove the Ethernet cable that is con-
nected to the DR Detector registration hub
from the portable X-ray device hub .
HINT • ••• •• •• •• ••• •• •• •• •• ••• •• •• •• ••• • • • •
• When the AeroDR Portable RF Unit is connected to
this device through a wireless connection, remove the
Ethernet cable from this device .
•• •• •• •• ••• •• •• •• ••• •• •• •• ••• •• •• •• ••• •• •• •• ••• •• • • • •
4
Unplug the power cable from the outlet
when charging this device .
5
Complete the exposure preparations .
• Confirm that the AeroDR Portable RF Unit is
shut down to complete the exposure and move-
ment preparations .
HINT • ••• •• •• •• ••• •• •• •• •• ••• •• •• •• ••• • • • •
• It is all right to keep power of this device and the DR
Detector on .
•• •• •• •• ••• •• •• •• ••• •• •• •• ••• •• •• •• ••• •• •• •• ••• •• • • • •
201