X85; „ Measurement Area Selection - Konica Minolta CM-25cG Instruction Manual

Measurement Area Selection
… „
Select the measurement area.
The selected measurement area can be checked on the status bar displayed on the screen. (Refer to page 20.)
Operating Procedure
1
Use the measurement area switch on the bottom of the instrument to set the measurement area
to MAV or SAV.
Settings
MAV: Measurement area of 8 mm (10 mm with gloss measurement)
{ „
SAV: Measurement area of 3 mm
{ „
Using the optional stapler type target mask (CM-A216) makes it possible to accurately aim where
measurement will be performed.
31
Operate the measurement area switch on the instrument.