IBM System x3800 Problem Determination And Service Manual page 45

v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v See Chapter 3, "Parts listing, System x3800 Type 8866," on page 107 to determine which components are
customer replaceable units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a
trained service technician.
Error code Description
00180100 A PCI adapter has requested memory
resources that are not available.
00180200 No more I/O space is available for a PCI
adapter.
00180300 No more memory (above 1 MB for a PCI
adapter).
00180400 No more memory (below 1 MB for a PCI
adapter).
00180500 PCI option ROM checksum error.
Action
1. Change the order of the adapters in the PCI slots.
Make sure that the boot device is positioned early
in the scan order (see the User's Guide for
information about the scan order).
2. Make sure that the settings for the adapter and all
other adapters in the Configuration/Setup Utility
program are correct. If the memory resource
settings are not correct, change them.
3. If all memory resources are being used, remove
an adapter to make memory available to the
adapter. Disabling the BIOS on the adapter
should correct the error. See the documentation
that comes with the adapter.
1. If the error code indicates a particular PCI slot or
device, remove that device.
2. If the error continues, reseat the following
components:
a. Each adapter
b. (Trained service technician only) PCI board
3. Replace the components listed in step 2 one at a
time, in the order shown, restarting the server
each time.
1. If the error code indicates a particular PCI slot or
device, remove that device.
2. Reseat the following components:
a. Each adapter
b. (Trained service technician only) PCI board
3. Replace the components listed in step 2 one at a
time, in the order shown, restarting the server
each time.
1. Reseat the following components:
a. Each adapter
b. (Trained service technician only) PCI board
2. Replace the components listed in step 1 one at a
time, in the order shown, restarting the server
each time.
1. Remove the failing adapter.
2. Reseat the following components:
a. Each adapter
b. (Trained service technician only) PCI board
3. Replace the components listed in step 2 one at a
time, in the order shown, restarting the server
each time.
29
Chapter 2. Diagnostics