SC-S30600 Series
4.14.2 MAC Address Input
EXECUTION MODE
Serviceman Mode
PROCEDURE
1.
Connect the printer to the computer both with a USB cable and a network cable.
2.
Turn the printer ON in the Serviceman Mode.
Turn the power ON while pressing [Menu] + [Back] + [OK].
3.
Start the Service Program and select
Figure 4-58. [MAC Address Input] Screen
ADJUSTMENT
MAC Address
Input.
Boards Related Checks and Adjustments
4.
Enter the MAC address indicated on the MAC address label attached on the rear of
the printer, and click [Write].
Rear of the printer
MAC address label
Figure 4-59. MAC Address Label
5.
Click [Read] one time and check that the address you entered and that displayed
on the screen are the same.
6.
Click [Finish].
7.
Turn the printer OFF to finish the adjustment.
Revision B
265
Confidential