Cleaning - Epson SC-S30600 Series Service Manual

SC-S30600 Series

5.5 Cleaning

5.5.1 Preliminary Check
PARTS TO BE CLEANED
Table 5-2. Parts to be Cleaned
Recommended
Parts to be Cleaned Cleaning
Frequency

Platen Heater

1 Pressure Roller Every day

Media holding plate
2 Near Print Head Every week
3 Wiper Every week
4 Cap Every week
5 Wiper Rail Every week
Figure 5-4. Parts to be Cleaned
MAINTENANCE
Notes
Clean when lint or dust of the media, or ink is
on.

Clean when head cleaning does not improve
print quality.

Finish cleaning within 10 minutes to prevent
Print Head from drying out.

Never touch the nozzle when cleaning the
Print Head.
REQUIRED TOOLS
Tool
Protective Glasses
(commercial item)
Maintenance kit
(attached to this printer)
Ink cleaner (consumable)
Waste cloth
(commercial item)
Metallic or plastic (PP/PE) tray
Placing used Cleaning swab or the like directly on the printer may
C A U T I O N
result in a permanent stain.
Cleaning
Table 5-3. Cleaning Tools
Purpose
Protect eyes from ink and Ink cleaner.
Gloves, Cleaning swab, Wiper, Wiper Cleaner, and Flushing
Absorber included.
Clean the Wiper, Cap and its surroundings, or Print Head
and its surroundings when the ink cannot be removed with a
dry cloth.
Wipe off stains inside the printer.
Place the used Cleaning swab or parts tainted with ink.
Revision B
282
Confidential