Initial Ink Charge - Epson SC-S30600 Series Service Manual

SC-S30600 Series

4.12.3 Initial Ink Charge

EXECUTION MODE
Serviceman Mode
PROCEDURE
C H E C K
Required time for the initial ink charge is about 5 minutes.
P O I N T
1. Turn the printer ON in the Serviceman Mode.
Turn the power ON while pressing [Menu] + [Back] + [OK].
2. Start the Service Program and select
3. Install the ink cartridges into all the ink holders.
4. Click [Run] to start the initial ink charge.
5. When finished, click [Finish].
6. Turn the printer OFF and finish the adjustment.
ADJUSTMENT
Initial ink charge.
Ink Supply Related Checks and Adjustments
Figure 4-50. [Initial ink charge] Screen
Revision B
259
Confidential