SC-S30600 Series
4.11.3 Nozzle Check
PAPER USED
Size: 16 inches length or longer
Type: 3M IJ40-10R
EXECUTION MODE
Normal Mode
PROCEDURE
1.
Load the paper into the printer.
2.
Turn the printer ON.
3.
Start the Service Program and select
4.
Select
Nozzle Check Pattern Print
click [Run].
The selected check pattern is printed.
5.
Examine the patterns for any missing segments, broken lines, or misaligned lines.
6.
If any of the above symptoms is observed, run the cleaning and print the pattern
again to see if the problem is solved.
7.
Click [Finish].
8.
Turn the printer OFF.
ADJUSTMENT
Nozzle
Check.
or
Alignment Check Pattern
Print, and
Head Related Checks and Adjustments
Figure 4-33. [Nozzle Check] Screen
Figure 4-34. Nozzle check pattern
Revision B
248
Confidential