Checking An Email Server Connection - Epson WF-7710 User Manual

User's Guide
Items
Sender's Address
SMTP Server Address
SMTP Server Port Number
POP3 Server Address
POP3 Server Port Number
Secure Connection

Checking an Email Server Connection

1. Select Settings on the home screen.
2. Select General Settings > Network Settings > Advanced.
3. Select Email Server > Connection Check to check that the printer is connected to the email server.
Note:
❏ If an error message is displayed, check if the email server settings are correct.
❏ When you cannot send an email even if the connection check succeeds, check the authentication method for the
email server you are using.
Related Information
"Messages Displayed During Connection Check" on page 281
&
Preparing the Printer
Explanations
Specify the email address that the printer uses to send
emails. You can specify the existing email address. To make it
clear that the email is being sent from the printer, you can
acquire an address specifically for the printer and enter it
here.
Enter the server address of the server that sends the email
(SMTP server).
Enter the port number of the server that sends the email
(SMTP server).
If you select POP before SMTP as the Email Server Authen-
tication Method, enter the server address of the server that
receives the email (POP3 server).
If you select POP before SMTP as the Email Server Authen-
tication Method, enter the port number of the email server
that receives the email (POP3 server).
If you select SMTP-AUTH or Off as the Email Server Au-
thentication Method, select the method of the secure con-
nection.
73