Epson WF-7710 User Manual page 174

User's Guide
5. Select the Condition(s) box to make a condition setting.
❏ Sender Fax Number match: If the incoming fax number matches the conditions you selected in this item,
the printer saves and forwards the received faxes.
Select Sender Fax Number match condition and enter the fax number (max. 20 digits) by selecting the Fax
Number box.
❏ Subaddress(SUB) perfect match: If the subaddress (SUB) is a perfect match, the printer saves and forwards
the received faxes.
Enable the Subaddress(SUB) perfect match setting and enter the password by selecting the
Subaddress(SUB) box.
❏ Password(SID) perfect match: If the password (SID) is perfectly matched, the printer saves and forwards
the received faxes.
Enable the Password(SID) perfect match setting and input the password by selecting the Password(SID)
box.
❏ Receiving Time: The printer saves and forwards received faxes during the specified time period.
Enable the Receiving Time setting and then set the time in Start Time and End Time.
6. Select OK, and then tap Close.
7. Select Save/Forward Destination box.
8. Tap Print to set this to On.
9. Select OK twice to return to the Save/Forward Settings screen.
10. Select the registered box for which you made a condition setting, and then tap Enable.
Related Information
"Save/Forward Settings" on page 193
&
"Print Settings" on page 196
&
Sending Email Notifications on the Results of Processing Received Faxes
(Conditional Save/Forward)
You can send an email containing the results of processing the received fax.
1. Select Settings on the home screen.
2. Select General Settings > Fax Settings > Receive Settings > Save/Forward Settings.
3. Select the registered box by tapping
4. Select Email Notifications.
5. Enable the following options as necessary.
Note:
The following options can be selected at the same time.
❏ Notify on Receive: send email to the recipient when the printer has finished receiving the fax.
Faxing
under Conditional Save/Forward.
174