Scanning To An Email - Epson WF-7710 User Manual

User's Guide
❏ Surround
Remove the shadows at the edge of the original.
❏ Center
Remove the shadows of the binding margin of the booklet.
Remove Punch Holes:
Remove the punch holes that appear in the scanned image. You can specify the area to erase the punch
holes by entering a value in the box on the right.
❏ Erasing Position
Select the position to remove the punch holes.
❏ Orientation (Original)
Select the orientation of the original.
File Name:
❏ Filename Prefix:
Enter a prefix for the name of the images in alphanumeric characters and symbols.
❏ Add Date:
Add the date to the file name.
❏ Add Time:
Add the time to the file name.

Scanning to an Email

You can send scanned image files by email directly from the printer through a pre-configured email server.Before
using this feature, you need to configure the email server.
You can specify the email address by entering directly, but it may be easier if you register the email address in the
contacts list first.
Note:
❏ Before you use this feature, make sure the printer's Date/Time and Time Difference settings are correct. Access the menus
from Settings > General Settings > Basic Settings > Date/Time Settings.
❏ You can check destination before scanning. Select Settings > General Settings > Scan Settings, and then enable Confirm
Recipient.
1. Place the originals.
Note:
If you want to scan multiple originals or make 2-sided scans, place all of the originals in the ADF.
2. Tap Scan on the home screen.
3. Tap Email.
4. Specify the addresses.
❏ To select frequently used addresses: Tap the icons displayed on the screen.
❏ To enter the email address manually: Tap Keyboard, enter the email address, and then tap OK.
Scanning
124