Epson WF-7710 User Manual page 154

User's Guide
Note:
You cannot send your document preferentially while one of the following is in progress because the printer cannot accept
another fax.
❏ Sending a monochrome fax with Direct Send enabled
❏ Sending a color fax
❏ Sending a fax using a connected telephone
❏ Sending a fax sent from the computer
Related Information
"Sending Faxes Using the Control Panel" on page 150
&
Sending Faxes in Monochrome at a Specified Time (Send Fax Later)
You can set to send a fax at a specified time. Only monochrome faxes can be sent when the time to send is
specified.
1. Select Fax on the home screen.
2. Specify the recipient.
3. Select the Fax Settings tab, and then select Send Fax Later.
4. Tap Send Fax Later to set this to On.
5. Tap the Time box, enter the time you want to send the fax, and then select OK.
6. Select OK to apply the settings.
Note:
To cancel the fax, cancel it from
Related Information
"Placing Originals" on page 52
&
"Sending Faxes Using the Control Panel" on page 150
&
"Fax Settings" on page 189
&
"Checking Fax Jobs" on page 187
&
Sending a Fax with a Selected Header
You can send a fax with sender information that is suitable for the recipient. You need to register multiple headers
of sender information in advance in the printer by following the steps below.
Registering Multiple Headers for Sending Faxes
You can register up to 21 fax headers as sender information.
1. Select Settings on the home screen.
Faxing
.
154