Operating Homelink; Garage Door Operation Indicators; Reprogramming A Single Homelink Button - Toyota RAV4 Hybrid 2018 Service Manual

■
Reprogramming a single HomeLink
When the following procedure is performed, buttons which already
have devices registered to them can be overwritten:
1
With one hand, press and hold the desired HomeLink
2
When the HomeLink
to hold the HomeLink
®
Link "
start flashing).

Operating HomeLink

Press the appropriate HomeLink
light should turn on.

Garage door operation indicators

The status of the opening and
closing of a garage door is shown
by the indicators.
1
Opening
2
Closing
This function is only available if the
garage door opener motor used is
a compatible device. (To check
device compatibility,
www.HomeLink.com.)
Orange (flashing)
Red (flashing)
The indicators can operate within approximately 820 ft. (250 m) of the
garage door. However, if there are obstructions between the garage
door and the vehicle, such as houses and trees, feedback signals
from the garage door may not be received.
To recall the previous door operation status, press and release either
®
HomeLink
The last recorded status will be displayed for 3 seconds.
RAV4-HV_OM_OM42B81U_(U)
6-4. Using the other interior features
®
indicator starts flashing (orange), continue
®
button and perform "Programming Home-
1
(it takes 20 seconds for the HomeLink
®
refer to
Color
Green
buttons and
®
button
®
button. The HomeLink
Status
Currently opening/closing
Opening/closing has completed
Feedback signals cannot be received
or and
465
®
button.
®
indicator to
®
indicator
6
simultaneously.