System Check Display; Suspension Of The Settings Display; Caution For Use While Driving; Cautions During Setting Up The Display - Toyota RAV4 Hybrid 2018 Service Manual

100
2. Instrument cluster
■

System check display

After turning the power switch to ON mode, opening image is displayed while
system operation is checked. When the system check is complete, the nor-
mal screen will return.
■

Suspension of the settings display

In the following situations, the settings display using the meter control
switches will be suspended.
●
When a warning message appears on the multi-information display
●
When the vehicle begins to move
■
When disconnecting and reconnecting 12-volt battery terminals
The drive information will be reset.
■
Liquid crystal display
Small spots or light spots may appear on the display. This phenomenon is
characteristic of liquid crystal displays, and there is no problem continuing to
use the display.
WARNING
■

Caution for use while driving

For safety, avoid operating the meter control switch while driving as much
as possible, and do not look continuously at the multi-information display
while driving. Stop the vehicle and operate the meter control switch. Failure
to do so may cause a steering wheel operation error, resulting in an unex-
pected accident.
■

Cautions during setting up the display

As the hybrid system needs to be operating during setting up the display,
ensure that the vehicle is parked in a place with adequate ventilation. In a
closed area such as a garage, exhaust gases including harmful carbon
monoxide (CO) may collect and enter the vehicle. This may lead to death or
a serious health hazard.
NOTICE
■
During setting up the display
To prevent 12-volt battery discharge, ensure that the hybrid system is oper-
ating while setting up the display features.
RAV4-HV_OM_OM42B81U_(U)