Turning The High Beam On/Off Manually; Switching To Low Beam; Switching To High Beam; High Beam Automatic Turning On Or Off Conditions - Toyota RAV4 Hybrid 2018 Service Manual

222
4-3. Operating the lights and wipers

Turning the high beam on/off manually

■

Switching to low beam

Pull the lever to the original
position.
The Automatic High Beam indi-
cator will turn off.
Push the lever away from you to
activate
Beam system again.
■

Switching to high beam

Turn the light switch to
position.
The Automatic High Beam indi-
cator will turn off and the high
beam indicator will turn on.
■

High beam automatic turning on or off conditions

●
When all of the following conditions are fulfilled, the high beam will be auto-
matically turned on (after approximately 1 second):
• Vehicle speed is above approximately 21 mph (34 km/h).
• The area ahead of the vehicle is dark.
• There are no vehicles ahead with headlights or tail lights turned on.
• There are few streetlights on the road ahead.
●
If any of the following conditions are fulfilled, the high beam will be automat-
ically turned off:
• Vehicle speed drops below approximately 17 mph (27 km/h).
• The area ahead of the vehicle is not dark.
• Vehicles ahead have headlights or tail lights turned on.
• There are many streetlights on the road ahead.
RAV4-HV_OM_OM42B81U_(U)
the Automatic High