Programming A Device Other Than An Entry Gate (For Usa Owners); Programming An Entry Gate (For Usa Owners)/Programming A Device In The Canadian Market - Toyota RAV4 Hybrid 2018 Service Manual

462
6-4. Using the other interior features
■
Programming HomeLink
Steps
1
wise the indicator light will stop flashing and programming will not
be able to be completed.
1
Press and release the HomeLink
and check that the HomeLink
2
Point
transmitter for the device at
the rear view mirror, 1 to 3 in.
(25 to 75 mm) from the
HomeLink
Keep the HomeLink
light in view while programming.
3
Program a device.
Programming a device other than an entry gate (for U.S.A.

owners)
Press and hold the handheld transmitter button until the Home-
®
Link indicator light changes from slowly flashing orange to rap-
idly flashing green (rolling code) or continuously lit green (fixed
code), then release the button.
Programming an entry gate (for U.S.A. owners)/Programming

a device in the Canadian market
Press and release the remote control transmitter button at 2 sec-
ond intervals, repeatedly, until the HomeLink
changes from slowly flashing (orange) to rapidly flashing (green)
(rolling code) or continuously lit (green) (fixed code).
RAV4-HV_OM_OM42B81U_(U)
®
through must be performed within 60 seconds, other-
3
the remote control
®
buttons.
®
indicator
®
button you want to program
®
indicator light flashes (orange).
®
indicator light