When Towing A Trailer; When Installing A Trailer Hitch; Do Not Directly Splice Trailer Lights - Toyota RAV4 Hybrid 2018 Service Manual

Hide thumbs Also See for RAV4 Hybrid 2018:
Table of Contents

Advertisement

WARNING
Hitch
Trailer hitch assemblies have different weight capacities established by the
hitch manufacturer. Even though the vehicle may be physically capable of
towing a higher weight, the operator must determine the maximum weight
rating of the particular hitch assembly and never exceed the maximum
weight rating specified for the trailer-hitch. Exceeding the maximum weight
rating set by the trailer-hitch manufacturer can cause an accident resulting
in death or serious personal injuries.

When towing a trailer

Toyota recommends trailers with brakes that conform to any applicable fed-
eral and state/provincial regulations.
If the gross trailer weight exceeds unbraked TWR, trailer brakes are
required. Toyota recommends trailers with brakes that conform to all appli-
cable federal and state/provincial regulations.
Never tap into your vehicle's hydraulic system, as this will lower the vehi-
cle's braking effectiveness.
Never tow a trailer without using a safety chain securely attached to both
the trailer and the vehicle. If damage occurs to the coupling unit or hitch
ball, there is danger of the trailer wandering into another lane.
NOTICE

When installing a trailer hitch

Use only the position recommended by your Toyota dealer. Do not install
the trailer hitch on the bumper; this may cause body damage.

Do not directly splice trailer lights

Do not directly splice trailer lights. Directly splicing trailer lights may damage
your vehicle's electrical system and cause a malfunction.
RAV4-HV_OM_OM42B81U_(U)
4-1. Before driving
199
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents