Turning The Blind Spot Monitor System On/Off; The Outside Rear View Mirror Indicators Visibility; Rear Cross Traffic Alert Buzzer Hearing; When There Is A Malfunction In The Blind Spot Monitor System - Toyota RAV4 Hybrid 2018 Service Manual

Hide thumbs Also See for RAV4 Hybrid 2018:
Table of Contents

Advertisement

2
Outside rear view mirror indicators
Blind Spot Monitor function:
When a vehicle is detected in the blind spot, the outside rear view mirror
indicator comes on while the turn signal lever is not operated. If the turn
signal lever is operated toward the detected side, the outside rear view
mirror indicator flashes.
Rear Cross Traffic Alert function:
When a vehicle approaching from the right or left rear of the vehicle is
detected, the outside rear view mirror indicators flash.
3
Rear Cross Traffic Alert buzzer (Rear Cross Traffic Alert function
only)
When a vehicle approaching from the right or left rear of the vehicle is
detected, a buzzer sounds from behind the left-hand rear seat.

Turning the Blind Spot Monitor system on/off

1
Press
multi-information display.
2
Press
then press

The outside rear view mirror indicators visibility

When under strong sunlight, the outside rear view mirror indicator may be dif-
ficult to see.

Rear Cross Traffic Alert buzzer hearing

Rear Cross Traffic Alert function may be difficult to hear over loud noises
such as high audio volume.

When there is a malfunction in the Blind Spot Monitor system

If a system malfunction is detected due to any of the following reasons, the
BSM warning messages will be displayed: (→P. 567, 569)
There is a malfunction with the sensors
The sensors have become dirty
The outside temperature is extremely high or low
The sensor voltage has become abnormal
RAV4-HV_OM_OM42B81U_(U)
4-5. Using the driving support systems
or
of the meter control switch and select
or
of the meter control switch and select
.
303
on the
4
, and

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents