Recall Procedure; To Stop The Position Recall Operation Part-Way Through; Operating The Driving Position Memory After Turning The Hybrid Sysytem Off; Seat Adjustment Caution - Toyota RAV4 Hybrid 2018 Service Manual

■

Recall procedure

1
Check that the shift lever is in P.
2
Turn the power switch to ON mode.
3
Press one of the buttons for
the driving position you want
to recall until the buzzer
sounds.
■

To stop the position recall operation part-way through

Perform any of the following:
●
Press the "SET" button.
●
Press button "1" or "2".
●
Operate any of the seat adjustment switches.
■
Operating the driving position memory after turning the hybrid system
off
Recorded seat positions can be activated up to 180 seconds after the driver's
door is opened and another 60 seconds after it is closed again.
■
If the 12-volt battery is disconnected
The memorized positions are erased.
WARNING
■

Seat adjustment caution

Take care during seat adjustment so that the seat does not strike the rear
passenger or squeeze your body against the steering wheel.
RAV4-HV_OM_OM42B81U_(U)
3-3. Adjusting the seats
151
3