Auto Connection; Manual Connection; When Connecting From The Bluetooth; Reconnecting A Bluetooth Phone - Toyota RAV4 Hybrid 2018 Service Manual

Auto connection

To turn auto connection mode on, set "Bluetooth* Power" to on.
(→P. 383)
When you register a phone, auto connection will be activated. Always
set it to this mode and leave the Bluetooth
connection can be established.
When the power switch is turned to ON mode, the system will search for a
nearby cellular phone you have registered.
Next, the system automatically connects with the most recent of the
phones connected to in the past. Then, the connection result is displayed.
*
: Bluetooth is a registered trademark of Bluetooth SIG, Inc.

Manual connection

When auto connection has failed or "Bluetooth* Power" is turned off,
you must connect the Bluetooth
*
: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Follow the steps in "Connecting a Bluetooth
(→P. 380)
■

When connecting from the Bluetooth

 Registering an additional device
Select "Select Device" on the Bluetooth
For more information: →P. 378
Selecting a registered device

Select "Select Device" on the Bluetooth
For more information: →P. 380
■
Reconnecting a Bluetooth
If the system cannot connect due to poor signal strength with the power
switch in ON mode, the system will automatically attempt to reconnect.
If the phone is turned off, the system will not attempt to reconnect. In this
case, the connection must be made manually, or the phone must be rese-
lected.
RAV4-HV_OM_OM42B81U_(U)
5-7. Connecting Bluetooth
®
phone in a place where a
®
device manually.
®
device" from
®
audio control screen
®
audio control screen.
®
audio control screen.
®
phone
381
®
1
.
5