Introduction; Kit Contents - Dremel 3D45 Original Instructions Manual

Welcome to the world of Dremel Digilab. Our mission is to mentor you through the digital fabrication process and
share best practices for bringing your ideas to life. 3D building is a process that will involve experimentation and
persistence. Thankfully, the Dremel experts are here to make your job easier with online tips and live support.
Dremel 3D45 brings new functionality, such as network connectivity and remote printing. To get started with 3D45
follow the initial setup routine on the touch screen to connect and register the printer. You can create a user
profile by going to www.dremel3d.com. Your profile gives you access to high-quality models, support and software
downloads, and remote printing services powered by Dremel3D cloud based software. Once setup and registration
is complete you are ready to start building.
Dremel 3D45
(2) Filament Spool**
(2) Glue Stick
* Quantities may vary depending on kit.
**Do not store in moist or hot environment.

INTRODUCTION

KIT CONTENTS*

Instruction Manual
Power Cable
Object Removal Tool
9
Quick Start Guide
USB Cable
USB Flash Drive
Unclog Tool