Building From Usb Flash Drive; Building From Print Queue; Build From Computer; Canceling Your Build On 3D45 - Dremel 3D45 Original Instructions Manual

BUILDING FROM USB FLASH DRIVE

1. On main menu tap "Build".
2. Tap USB icon to access contents of USB flash
drive.
3. Follow steps 3-7 from Build from On-Printer storage
to complete build from USB flash drive.

BUILDING FROM PRINT QUEUE

If your 3D45 is registered and added to your Dremel3D
profile, you can send Builds from your web browser at
dremel3d.com or by using the Dremel3D cloud slicer
(see page 18).
1. If your 3D45 is displaying the Print Queue
notification tap "Yes" in the notification window to
access the Print Queue. If you choose "No" you
can later access your Print Queue by tapping
"Build" then "Print Queue".
2. In the Print Queue menu you can choose to "Build"
the next model in the queue or "Delete" it and
advance to the next model.
3. In Model Details tap "Build" to begin building
process or "Delete" to remove the file.

BUILD FROM COMPUTER

Dremel 3D45 is compatible with Print Studio from
Autodesk, Dremel's cloud-based platform, and will
included plug-ins for Cura and Simplified 3D. Follow
the instructions that came with this software to
complete a Build from your computer.

CANCELING YOUR BUILD ON 3D45

To cancel your object during preheating or building, tap
"Stop" on the touch screen. If you confirm "Yes" the
extruder and build platform will move to their calibration
positions.
26
FIG. 7
USB Flash Drive