Introduction; Kit Contents - Dremel 3D45 Operating/Safety Instructions Manual

DM 2610047405AB 03-18_3D45 3/27/18 9:51 AM Page 10
10
Welcome to the world of Dremel Digilab. Our
mission is to mentor you through the digital
fabrication process and share best practices
for bringing your ideas to life.
3D building is a process that will involve
experimentation and persistence. Thankfully,
the Dremel experts are here to make your
job easier with online tips and live support.
Dremel 3D45 brings new functionality, such
as network connectivity and remote printing.
To get started with 3D45 follow the initial
setup routine on the touch screen to connect
and register the printer.
Dremel 3D45
Filament Spool**
Glue Stick
*Quantities may vary depending on kit.
**Do not store in moist or hot environment.

Introduction

You can create a user profile by going to
www.digilab.dremel.com. Your profile gives
you access to high-quality models, support
and software downloads, and remote printing
services powered by 3DPrinterOS. Once
setup and registration is complete you are
ready to start building.

Kit Contents*

Instruction Manual
Power Cable
Object Removal Tool
Quick Start Guide
USB Cable
USB Flash Drive
Unclog Tool