Settings; Preheat; Language; Display - Dremel 3D45 Original Instructions Manual

SETTINGS

LANGUAGE – Tap to pick alternate menu

language.

DISPLAY – Tap to customize cabinet LEDs or
main menu hotkeys.
SOUNDS – Tap to turn 3D45 sounds On/Off.
TOKEN – Tap to release current token and get a
new token when connected to Wifi or Ethernet.
ADVANCED MODE – Tap to manually prioritize
GCode settings.
FACTORY RESET – Tap to remove all
information stored on 3D45 and return it to
factory defaults.

PREHEAT

Tap "Nozzle Temp" to automatically begin
preheating the extruder for building or removing
excess debris. Once your optimal temperature
is achieved, tap "Platform Temp" to begin
preheating the build platform.
PURGE – Once extruder is hot, tap to manually
extrude filament.
15