Midi Control/Program Change Messages; Mixer Control Change Parameters - Tascam 2488 Reference Manual

The following are the MIDI Control Change mes-
sages accepted by the 2488 to control different set-
tings. When used with an external sequencer, this

Mixer Control Change parameters

The Bank Select controller is used with channel 15 to
choose which group of eight channels or inputs are
affected. It is therefore necessary to send a MIDI
message of BE 00 xx (where xx selects the group of
eight channels or inputs) before sending the Control
Change messages on the appropriate MIDI channel.
MIDI channel
Control Change
Parameter
Number
7 Internal Level
10 Pan
11 Attenuation
16 Low Freq
17 Low Gain
18 Mid Freq
19 Mid Gain
20 Mid Q
21 High Freq
22 High Gain
23 LOOP Effect Level
24 EFFECT1 Level
25 EFFECT2 Level
80 EQ SW
81 LOOP Effect Pos
82 EFFECT1 Pos
83 EFFECT2 Pos
84 Phase
1 – MIDI Control/Program Change messages
provides a certain degree of automation for mixing,
etc.
Bank 0: Mixer channels 1 though 8
Bank 1: Mixer channels 9 through 16
Bank 2: Mixer channels 17 through 24
Bank 3: Inputs A through H
Once the group has been selected, use MIDI channels
1 through 8 to control the mixer channels or inputs
(or MIDI channel 13 for the tone generator, or MIDI
channel 16 for the stereo master or send master).
1–8
Mixer/Input channel
Values
0 - 127 (0= –∞ dB, 100 = 0dB, 127 = +6dB)
1 = L63, 64 = Center, 127 = R63
0 – 8 = –42, –36, –30, –24, –18, –12, –6, 0, +6(dB)
0 – 31 = 32, 40, 50, 60, 70, 80, 90, 100, 125, 150, 175, 200, 225, 250, 300, 350,
400, 450, 500, 600, 700, 800, 850, 900, 950, 1.0k, 1.1k, 1.2k, 1.3k, 1.4k, 1.5k,
1.6k (Hz)
0 – 24 = –12 to +12 (dB)
0 – 63 = 32, 40, 50, 60, 70, 80, 90, 100, 125, 150, 175, 200, 225, 250, 300, 350,
400, 450, 500, 600, 700, 800, 850, 900, 950, 1.0k, 1.1k, 1.2k, 1.3k, 1.4k, 1.5k,
1.6k, 1.7k, 1.8k, 1.9k, 2.0k, 2.2k, 2.4k, 2.6k, 2.8k, 3.0k, 3.2k, 3.4k, 3.6k, 3.8k,
4.0k, 4.5k, 5.0k, 5.5k, 6.0k, 6.5k, 7.0k, 7.5k, 8.0k, 9.0k, 10k, 11k, 12k, 13k, 14k,
15k, 16k, 17k, 18k (Hz)
0 – 24 = –12 to +12 (dB)
0 - 6 = 0.25, 0.5, 1, 2, 4, 8, 16
32 – 63 = 1.7k, 1.8k, 1.9k, 2.0k, 2.2k, 2.4k, 2.6k, 2.8k, 3.0k, 3.2k, 3.4k, 3.6k,
3.8k, 4.0k, 4.5k, 5.0k, 5.5k, 6.0k, 6.5k, 7.0k, 7.5k, 8.0k, 9.0k, 10k, 11k, 12k, 13k,
14k, 15k, 16k, 17k, 18k (Hz)
0 – 24 = –12 to +12 (dB)
0 – 127 (0= –∞dB, 100 = 0dB, 127 = +6dB)
0 – 127 (0= –∞dB, 100 = 0dB, 127 = +6dB)
0 – 127 (0= –∞dB, 100 = 0dB, 127 = +6dB)
0, 1 = OFF, ON
0, 1 ,2 = OFF, PRE, POST
0, 1, 2 = OFF, PRE, POST
0, 1, 2 = OFF, PRE, POST
0, 1 = N, R
13 16
TG STEREO/MASTER
(MASTER LEVEL)
(MASTER LEVEL)
(MASTER LEVEL)
TASCAM 2488 Reference Manual
—
—
3