Fluke DTX-1800 Technical Reference Handbook page 395

Far End Source mode, 8-40
Loopback mode, 8-30
Smart Remote mode, 8-20
when to set, 8-10
twisted pair, 3-1
Reflectance, 7-43
Reflection, 7-37
Reflective Event Loss, 12-8
registration, 1-2
Remote End Setup, 8-14
renaming results, 13-8
resistance
coaxial, 5-10
diagnosing failures, 6-3
specifications, 14-15
twisted pair, 3-17
Result Storage Location, 1-31, 2-2, 13-3
results
AC wire map, 4-4
network connectivity, 11-8
return loss
diagnosing failures, 6-5
HDTDR analyzer, 6-10
specifications, 14-18
test, 3-26
RJ11 connector, 1-9
RTT, 11-12
–S–
safety information
fiber loss/length module, 8-2
general, 1-8
maintenance, 14-1
OTDR module, 7-2
standards, 14-37
symbols, 1-8
saving results, 11-6
Auto Save Results, 1-32, 13-3
different tests in one record, 1-33
network connectivity, 11-6
scanning
coaxial resistance, 5-10
HDTDR, 6-10
HDTDX, 6-7
twisted pair resistance, 3-17
wire map, 3-15
Segment Attenuation Coefficient, 7-43, 12-8
self test
coaxial adapters, 5-2
fiber loss/length modules, 8-8
OTDR module, 7-8
twisted pair adapters, 1-24
sequential cable IDs, 2-23
serial cable (RS-232), 14-3
serial port, 14-38
Index
11