ECB Drive or Bypass Selection
Use the drive keypad and display to switch between the motor running in drive mode or bypass when operating
in local control. The display in operating mode is shown below.
1. Press DRIVE BYPASS key. Display
changes to show bypass and drive
mode options (shown in Step 2).
2. When running in drive mode, press
OK key on keypad to activate bypass
mode or press CANCEL to remain in
drive mode. In bypass, motor will run at
full speed.
3. When running in drive mode, press
OK key on keypad to activate drive
mode or press CANCEL to remain in by-
pass mode.
4. Press STATUS key to return to drive
status display.
Table 6.4
NOTE PRESSING THE INFO KEY AT ANY TIME DISPLAYS TIPS AND GUIDELINES FOR PERFORMING THE
FUNCTION CURRENTLY ACTIVATED.
Illustration 6.5
TR200 Option Panel Operating Instructions
Electronically Controlled Bypass (ECB) Oper-
1 = Display
2 = Info key
3 = Drive/Bypass Option Key
ation
45