Wiring (continued)
To Drive from Analog Output 42:
Wire as shown in figure 2 below. Program the relay using parameter 319.
To Drive from Analog Output 45:
Wire as shown in figure 3 below. Program the relay using parameter 321.
Output 42
TR1 VFD
®
VLT 5000
Internal
Relay
Contacts
Tighten terminals on drive terminal strip to 5 in-lbs (0.6 N-m).
Tighten terminals on option card to 3.5 in-lbs (0.4 N-m).
10
Output 45
®
VLT 5000
TR1 VFD
Internal
Relay
Contacts