Wlan Params - Printronix P7000 User Manual

WLAN PARAMS

WLAN
PARAMS
(from page 108)
NetBIOS ASCII
Protocol Data Port
Enable* 9100*
Disable 1023 - 65535
Job Control
Standard*
Enhanced
Off
For information on assigning the IP Address, Gateway Address,
Subnet Mask, and MAC Address, refer to the Network Interface
Card User's Manual .
NetBIOS Protocol
This option determines whether the NetBIOS protocol will be
available. The selections are as indicated below:
•
Enable (default). Makes the NetBIOS protocol available with
the ethernet installed.
•
Disable. Makes the NetBIOS protocol unavailable during
printer operation.
IPDS Data Keep Alive
Port Timer
5001* 3 Minutes*
1023 - 65535 2 - 10 Minutes
WLAN PARAMS
* = Factory Default
Ethernet
Speed
Auto Select*
10 Half Duplex
10 Full Duplex
100 Half Duplex
100 Full Duplex
119