Printronix P7000 User Manual page 272

Chapter 4
LG Emulation
•
•
Horiz Forms
•
•
Autowrap
This parameter determines if text will wrap to the next line when the
line of text exceeds the right margin.
•
•
272
Top Mrg 6/0.This option sets the top margin for the forms. You
must specify the top margin in lines (at 6 lines per inch),
ranging from 0 to 198 lines (33 inches). The default setting is 0.
Press the right arrow to increase the value, left arrow to
decrease the value, and ENTER to change units. The margins
will automatically adjust so that the top and bottom margins do
not cross each other.
Bot Mrg 66/6. This option sets the bottom margin for the forms.
You must specify the bottom margin in lines (at 6 lines per
inch), ranging from 0 to 198 lines (33 inches). The default
setting is 66. Press the right arrow to increase the value, left
arrow to decrease the value, and ENTER to change units.
Selecting a value for this option resets the top margin to 0, so
the top margin must be redefined after this option is selected.
Left Mgr 0.00 (default). This sets the left margin for the forms.
You must specify the left margin in 1/10 inch increments, from 0
to 13.1 inches. The default value is 0. Press the right arrow to
increase the value, left arrow to decrease the value, and
ENTER to change units. The margins will automatically adjust
so that the left and right margins do not cross each other.
Right Mrg 13.2. This sets the right margin for the forms. You
must specify the right margin in 1/10 inch increments, from 0.1
to 13.2 inches. The default value is 13.2. Press the right arrow
to increase the value, left arrow to decrease the value, and
ENTER to change units. The margins will automatically adjust
so that the left and right margins do not cross each other.
No (default). Any print data received past the forms width
setting is discarded.
Yes. An automatic carriage return and line feed is performed
when data is received past the forms width setting.