Printronix P7000 User Manual page 198

Chapter 4
Coax/Twinax (CTHI) Emulation
Active Char Set
Selects which group of character sets (Primary or Secondary) will
be active.
•
Secondary Set (default)
•
Primary Set
Prt Partial Line
•
Enable (default). When this option is enabled, it forces the
printer to print if a partial line is in the printer (i.e. line not ending
with a LF).
•
Disable. When disabled, the last partial line of data will not be
printed.
PTX Transparent
Lead-in Chars
You can enable additional printer features which are not accessible
through standard TN5250 emulations. To access these features,
send text commands in the data stream. The commands must have
a start and end code. Four sets are available:
•
Set 1. start code: <% (default)
•
Set 2. start code:
•
Set 3. start code: _%
•
User Defined.
198
stop code: >
¬¬
stop code: $
stop code: _