P-Series Emulation (With Lg) - Printronix P7000 User Manual

P-Series Emulation (with LG)

Printer
Protocol
(from page 209)
P-Series
Control Code
Control Code
06
08
8.0 LPI*
Elongated*
10.3 LPI
Backspace
6.0 LPI
P-Series
EVFU Select
SFCC
1* Enable*
(0-7F hex)
Disable
Control Code 06
Control Code 06 defines the function of ASCII code hex 06 (ACK).
You can select an alternate line spacing of 6, 8, or 10.3 LPI.
Control Code 08
Control Code 08 defines the function of ASCII code hex 08 (BS).
You can define the code to output the following character:
•
Elongated (default).
•
Backspace.
Auto LF
Define CR
Code
CR = CR* Disable*
CR = CR + LF Enable
Alt. Set Character
80-9F Set
Control Code* (see page 227)
Printable
P-Series Emulation (with LG)
* = Factory Default
Overstrike Define LF
Code
Enable* LF = CR + LF*
Disable LF = LF
SFCC d
Command
Even dot plot*
Double high
221