Printronix P7000 User Manual page 223

P-Series SFCC
This parameter allows you to select which ASCII codes will function
as the Special Function Control Code (SFCC) command delimiter.
P-Series codes can use hex 00 through hex 7F. Options include the
following:
•
ESC (hex 1B)
•
SOH (hex 01)
•
ETX (hex 03)
•
CIRCUMFLEX (hex 5E)—also called caret (^)
•
TILDE (hex 7E)—(~)
NOTE: SOH, ETX, and ESC are non-printables. The characters (^)
and (~) are printable; however, do not use them as
printables in the host data stream if either is chosen as a
delimiter because print errors will occur.
VFU Select
Controls how the printer handles vertical formatting.
•
EVFU (default). Enables the VFU and selects P-Series
compatible Electronic Vertical Format Unit (EVFU).
•
DVFU. Enables the VFU and selects the Dataproducts
compatible Direct Access Vertical Format Unit (DVFU).
•
CVFU. Enables the VFU and selects the Centronics compatible
Direct Access Vertical Format Unit (CVFU).
•
Disable. Disables all VFU processing.
Alt. Set 80-9F
Determines whether the printer processes ASCII codes hex 80
through hex 9F as control codes or as printable characters. The
options include:
•
Control Code (default)
•
Printable.
P-Series Emulation
P-Series Emulation (with LG)
223