Alt. Char Set - Printronix P7000 User Manual

Chapter 4
LinePrinter Plus Emulation (with PCL-II)

Alt. Char Set

This option determines if data in the range of hex 80 through hex
9F should be interpreted as a control code or as a printable
character.
•
Set 1 (default). Interprets data in the range of hex 80 through
hex 9F as a control code.
•
Set 2. Prints data for the characters at hex locations 03, 04, 05,
06, 15, and 80 through 9F.
20 CPI Condensed
Compressed print characters are narrower than the normal
character set. This is helpful for applications where you need to
print the maximum amount of information on a page.
•
Enable (default). Prints characters about 60 percent the width
of normal characters when compressed print is chosen by the
host computer.
•
Disable. Does not compress print widths, even if condensed
print is chosen by the host.
238