SPC Space Supp
This option is only available in Coax SPC emulation and is used in
LU3/DSC/DSE mode only.
•
Disable (default). Treats nulls and spaces normally.
•
Enable. If the entire line consists of spaces and nulls, the line
will be discarded.
NL At MPP+1
Controls how many lines are skipped when the carriage returns to a
new line.
•
On (default). Moves to the first print position two lines down
from the current position.
•
Off. Moves to the first print position of the next print line.
SPC Coax Params
205