WEC8500/8050 Maintenance Manual
CHAPTER 5.
This chapter describes the problems which could occur concerning various settings for the
wireless interface using Wi-Fi.
5.1
Problem with Radio Settings
Symptoms
Radio settings for 802.11a, 80211.bg, 802.11n, etc. cannot be configured on the AP.
Possible Causes
The AP is not connected.
CAPWAP state of the AP is not RUN (5)
Solutions
1) Execute the 'show ap summary' command to check that the AP is connected.
If the AP is shown, setup the AP by referring to AP Settings.
WEC8500# show ap summary
AP Mgnt interface IP : 10.64.55.1 (vlan1.192)
AP_ID CFG_NAME AP_NAME
====== ======== ================ ================ ============= ===== =========
1
ap_1
2
ap_2
3
ap_3
Samsung Electronics America
Wi-Fi Management
MAC_Address
AP_f4d9fb23d049 f4:d9:fb:23:d0:49 10.64.55.103 1/1/5
AP_f4d9fb23cfc9 f4:d9:fb:23:cf:c9 10.64.55.57 1/1/5
AP_f4d9fb23cbf9 f4:d9:fb:23:cb:f9 10.64.55.102 1/1/5
IPv4Addr
State Location
page 72 of 87
Version 5.1