Automatic Upgrade Does Not Work On Ap - Samsung WEC8500 Maintenance Manual

WEC8500/8050 Maintenance Manual
3.2

Automatic Upgrade does not Work on AP

When attempting a CAPWAP connection, if the firmware version of the AP registered with
the APC is different from the firmware version the AP is actually running, the AP is
automatically upgraded.
Symptoms
Automatic Upgrade does not Work on AP.
Version information of 'Default' Type checked with 'show ap upgrade summary' must be
the same as the firmware version of the AP.
Firmware version information of the AP can be checked under Version (current) of the
AP_ID executing the 'show ap upgrade list'.
If the AP model is 'WEA30x', the 'weafama' package is used and if the AP model is
'WEA40x', the 'weafamb' package is used.
WEC8500# show ap upgrade summary
===== ap upgrade config summary =====
Type
Mode
Path
IpAddress
PortNum
MAXretries
MAXdownload
currentDownload : 0
waitApCount
Target
PKG_Name
weafama
weafama
weafama
weafamb
weafamb
weafamb
WEC8500# show ap upgrade list
/* (RC/FR/RC) : RetryCount/FailReason/RebootCause
/* Pri : VersionPriority (MD-model,A-AP config)
AP_ID Model
1 WEA303i
Samsung Electronics America
: Default
: FTP
: package/ap
: 10.10.10.11
: 21
: 3
: 3
: 0
: All
Version FileName
1.2.6.R weafama_1.2.6.R.bin Default
Version(config/current)
Global/ 1.2.6.R
Type
Quick Upgrade
Predownload
Default
Quick Upgrade
Predownload
Status(RC/FR/RC) Pri force
None( 0/ 0/128)
Version 5.1
MD No
page 63 of 87